For parts which are no longer available we can offer a reconditioning service. We can provide a reconditioning service for the following parts -
- Manual Steering Racks
- Power Steering Pumps
- Lever Arm Shock Absorbers
- Stub Axles
- Brake Calipers
- Wheel Cylinders
- Brake Servos
- Brake Master Cylinders
- Clutch Slave Cylinders
- Clutch Master Cylinders
We specialise in all types of cylinder including parallel bore, stepped bore, open and closed ended, twin bore and multi-ported types.
Most types of brake cylinders are suitable for stainless steel re-sleeving eg. Girling, Lockhead, ATE, Bonaldi, Bendix, Clayton, Dunlop, Delco etc.
This is a price guideline for double ended wheel cylinders internal bore sizes -
- up to 1" £59.95 + VAT 20%
- up to 1 1/8" £67.65 + VAT 20%
- up to 1 1/4" £71.75 + VAT 20%
- cylinders with a handbrake mechanism will incur an extra cost (this is normally £15.00 + VAT)
- Other bore sizes are undertaken and prices are available on request
All Calipers are stripped, cleaned, plated where necessary and assembled using quality pistons and seals. Each unit is fully tested using a computerised pressure decay test equipment.
Stainless steel pistons can be installed on request for most vehicles, please ask for a quote.
We are able to re-manufacture most types of direct and remote acting servos, with our range being constantly developed and updated for further details please enquire.
All servo cylinders are sleeved in stainless steel as standard procedure, tested on both pressure decay and fluid pressure equipment which includes vacuum/boost ratio output.
Please feel free to email us your requirements at firstname.lastname@example.org for a quote. You will need to forward us your make, model and age of your vehicle and if you know if your part is a Lucas type, or Girling, bore size, etc., this can be helpful. If you advise us of your address, then we will also be able to provide you with the delivery charge as well.
Our reconditioned parts are refurbished to the highest quality and parts come with a 12 months guarantee. Hydraulic parts are stainless steel sleeved and bored, where required, and come with new seals. This service is normally recon return.
Showing 1 of 1 items in Reconditioning Service